Degradation of welded joint made of T91 steel with different additional materials

Main Article Content

Klaudia Klimaszewska
Kwiryn Wojsyk
Grzegorz Golański

Abstract

The aim of the research was to analyse the processes of degradation observed in a dissimilar welded joint of T91 steel. The analysis was performed for welded joints after long-term annealing for up to 8000 hours at the temperature of 600oC. Microstructural analysis and hardness testing were performed. The purpose of the tests was to evaluate the effect of annealing time at the temperature of ageing on formation and properties of the decarburized zone in the inter-bead area of the welded joint.The aim of the research was to analyse the processes of degradation observed in a dissimilar welded joint of T91 steel. The analysis was performed for welded joints after long-term annealing for up to 8000 hours at the temperature of 600oC. Microstructural analysis and hardness testing were performed. The purpose of the tests was to evaluate the effect of annealing time at the temperature of ageing on formation and properties of the decarburized zone in the inter-bead area of the welded joint.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
K. Klimaszewska, K. Wojsyk, and G. Golański, “Degradation of welded joint made of T91 steel with different additional materials”, Weld. Tech. Rev., vol. 91, no. 7, pp. 55–60, Oct. 2019.
Section
Original Articles

References

Sorentino S., Welding technologies for ultra-supercritical power plant materials, Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, Woodhead Publishing, 2017, 274-316. DOI: 10.1016/B978-0-08-100552-1.00013-0

Zieliński A., Dobrzański J., Purzyńska H., Sikora R., Dziuba-Kałuża M., Kania Z., Evaluation of creep strength

of heterogeneous welded joint in HR6W alloy and Sanicro 25 steel, Archives of Metallurgy and Materials, 2017,

Vol. 62(4), 2057-2064. DOI: 10.1515/amm-2017-0305

Łomozik M., Zeman M., Jachym R., Cracking of welded joints made of steel X10CrMoVNb9-1 (T91) case study, Metallic Materials, 2012, Vol. 50(4), 285-294. DOI: 10.4149/km_2012_4_285

Zieliński A., Dobrzański J., Purzyńska H., Golański G., Structure and creep resistance of austenitic steel Super 304H, Materials Testing, Properties, Vol. 57(10), 859-865. DOI: 10.3139/120.110791

Czupryński A., Kik T., Górka J., Using of low heat input CBT process in joning of high-alloy steel with cooper, Welding Technology Review, 2015, Vol. 87(5), 23-33. http://dx.doi.org/10.26628/wtr.v87i5.222

Wojdat T., Kustroń P., Lange A., Łącka I., Research on the properties braze-welded joints aluminium with steel using filler metals on Al and Zn matrix, Welding Technology Review, 2017, Vol. 89(7), 22-25.

http://dx.doi.org/10.26628/wtr.v89i7.794

High Temperature and Creep-resistant Filler Metals BÖHLER

Foret R., Zlamal B., Sopouse J., Structural stability of dissimilar weld between two Cr-Mo-V steels, Welding Journal, 2001, Vol. 6(6), 405-411. DOI: 10.1179/stw.2001.6.6.405

Dawson K.E., Tatlock G.J., Chi K., Barnard P., Changes in precipitate distributions and the microstructural evo-lution of P24/P91 dissimilar metal welds during PWHT, Metallurgical and Materials Transactions A, 2013, Vol. 44(11), 5065-5080. DOI: 10.1007/s11661-013-1880-y

Sudha C., Paul V.T., Terrance A.L.E., Saroja S., Vijayalakshmi M., Microstructure and microchemistry of hard zone in dissimilar weldments of Cr-Mo steels, Welding Research, 2006, Vol. 6(85), 71-80.

DOI: 10.1179/1878641315Y.0000000002

Sudha C., Terrance A.L.E., Albert S.K., Vijayalakshmi M., Systematic study of formation of soft and hard zones in the dissimilar weldments of Cr-Mo steels, Journal of Nuclear Materials, 2002, Vol. 302(2-3), 193-205.

DOI: 10.1016/S0022-3115(02)00777-8

Tasak E., Ziewiec A., Brzeziak A., The problems appearing during the reparation of welds in dissimilar steels, Archives of Foundry, 2006, Vol. 6(21/2), 221-227.

Most read articles by the same author(s)

1 2 3 > >>