Współosiowe napawanie laserowe drutu ze stali AISI 316L - badania wpływu parametrów obróbki
##plugins.themes.bootstrap3.article.main##
Abstrakt
Laser cladding technology is a well-established process, commonly used for deposition of improved-property coatings, repair of machine parts and additive manufacturing. Currently, in terms of application of laser cladding, the method based on powder deposition is much more common, as the use of an adapted nozzle allows the coaxial and direction-independent feeding of additional material into the weld pool. However, laser cladding with powder also has some significant drawbacks, e.g., limited powder feeding and melting efficiency, lower productivity and the resulting dust that poses a health risk to operators. The solution to these limitations is the use of additional material in the form of wire. To maintain the ability to coaxially feed the wire to the laser beam interaction point, a specialized cladding head is necessary. In mentioned system the laser beam, while being passed through the optical system, is divided into three separate beams that are focused on the substrate on the working point of the head. In this study, the COAXwire cladding head was integrated into the robot station and laser cladding process was carried out to determine the influence of the processing parameters on the deposition results. The parameters of the cladding system were identified, including the measurement of laser beam caustic. The experimental trials were carried out using AISI 316L wire deposited on S420MC substrate. The effect of the processing parameters on the geometry of the clad was determined with particular emphasis on the wire feeding.
Pobrania
##plugins.themes.bootstrap3.article.details##
Utwór dostępny jest na licencji Creative Commons Uznanie autorstwa – Użycie niekomercyjne – Na tych samych warunkach 4.0 Międzynarodowe.
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Artykuły czasopisma Welding Technology Review (Przegląd Spawalnictwa) publikowane są w otwartym dostępie na licencji CC BY (licencja Creative Commons Uznanie autorstwa 4.0 Międzynarodowe). Licencja CC BY jest najbardziej otwartą dostępną licencją i uważaną za „złoty standard” w formule otwartego dostępu; jest również preferowany przez wielu fundatorów badań. Licencja ta umożliwia czytelnikom kopiowanie i redystrybucję materiału na dowolnym nośniku i w dowolnym formacie, a także zmienianie, przekształcanie lub budowanie na nim materiału, w tym do użytku komercyjnego, pod warunkiem wskazania oryginalnego autora.
Bibliografia
Poprawe R. Tailored Light 2. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011.
St. Węglowski M.; Błacha S.; Jachym R. et al. Additive manufacturing with wire – Comparison of processes, PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, Vitoria-Gasteiz, Spain, 2019, p.150016.
Demir AG. Micro laser metal wire deposition for additive manufacturing of thin-walled structures, Optics and Lasers in Engineering, 2018, Vol. 100, 9–17. https://doi.org/10.1016/j.optlaseng.2017.07.003
Kaierle S.; Barroi A.; Noelke C. et al. Review on Laser Deposition Welding: From Micro to Macro, Physics Procedia, 2012, Vol. 39,336–45. https://doi.org/10.1016/j.phpro.2012.10.046
Heigel J.C.; Gouge M.F.; Michaleris P. et al. Selection of powder or wire feedstock material for the laser cladding of Inconel® 625, Journal of Materials Processing Technology, 2016, Vol. 231, 357–65. https://doi.org/10.1016/j.jmatprotec.2016.01.004
Mukherjee T.; DebRoy T. Printability of 316 stainless steel, Science and Technology of Welding and Joining, 2019, Vol. 24(5), 412–19. https://doi.org/10.1080/13621718.2019.1607061
Froend M.; Ventzke V.; Kashaev N. et al. Thermal analysis of wire-based direct energy deposition of Al-Mg using different laser irradiances, Additive Manufacturing, 2019, Vol. 29, 100800. https://doi.org/10.1016/j.addma.2019.100800
Zhang Z.; Kong F.; Kovacevic R. Laser hot-wire cladding of Co-Cr-W metal cored wire, Optics and Lasers in Engineering 2020, Vol. 128, 105998. https://doi.org/10.1016/j.optlaseng.2019.105998
Ahn D.G. Directed Energy Deposition (DED) Process: State of the Art. Int. J. of Precis. Eng. and Manuf.-Green Tech. 2021;8(2):703–42. https://doi.org/10.1007/s40684-020-00302-7
Volpp J.; Prasad H.S.; Riede M. et al. Powder particle attachment mechanisms onto liquid material, Procedia CIRP, 2018, Vol. 74, 140–43. https://doi.org/10.1016/j.procir.2018.08.064
Kelbassa J.; Gasser A.; Bremer J. et al. Equipment and process windows for laser metal deposition with coaxial wire feeding, Journal of Laser Applications, 2019, Vol. 31(2), 22320. https://doi.org/10.2351/1.5096112
Henri P.; Jonne N.; Sebastian T. et al. Laser cladding with coaxial wire feeding, International Congress on Applications of Lasers & Electro-Optics, Anaheim, California, USA, 2012, p.1196–201.
Arrizubieta J.I.; Klocke F.; Klingbeil N. et al. Evaluation of efficiency and mechanical properties of Inconel 718 components built by wire and powder laser material deposition, RPJ, 2017; Vol. 23(6), 965–72. https://doi.org/10.1108/RPJ-01-2016-0012
Elmer J.W.; Gibbs G.; Carpenter J.S. et al. Wire-Based Additive Manufacturing of Stainless Steel Components, WJ, 2020, Vol. 99(1), 8s-24s. https://doi.org/10.29391/2020.99.002
Nowotny S.; Brueckner F.; Thieme S. et al. High-performance laser cladding with combined energy sources, Journal of Laser Applications, 2015, Vol. 27(S1), S17001. https://doi.org/10.2351/1.4817455