Comparison of tribological properties and structure of coatings produced in powder flame spraying process on grey cast iron
##plugins.themes.bootstrap3.article.main##
Abstrakt
In this article results of tribological and structural properties comparison of flame sprayed, by SupJet-S-Eutalloy® multipurpose system, two self-fluxing alloys of Ni-B-Si type in the form of powder for spraying with remelting are presented. Layers were produced on EN-GJL-250 grade grey cast iron with flake graphite in an austenitic matrix. Abrasive wear resistance examination acc. to ASTM G65-00 and erosive wear resistance examination acc. to ASTM G76-2 were performed. Obtained results were compared with abrasion-resistant steel Hardox® 400. Macro- and microscopic examination were carried enabling layer quality evaluation and structure of examined layer and base material determination. X-ray microanalysis was performed to obtain qualitative and quantitative data about microareas chemical composition. The Eutalloy® BronzoChrom 10185 powder flame sprayed layer with higher Boron and Silicon content was characterized by 13% lower wear intensity under mineral abrasive conditions and about 30% higher erosion wear resistance than Eutalloy® NiTec 10224 powder flame sprayed layer.
Pobrania
##plugins.themes.bootstrap3.article.details##
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Artykuły czasopisma Welding Technology Review (Przegląd Spawalnictwa) publikowane są w otwartym dostępie na licencji CC BY (licencja Creative Commons Uznanie autorstwa 4.0 Międzynarodowe). Licencja CC BY jest najbardziej otwartą dostępną licencją i uważaną za „złoty standard” w formule otwartego dostępu; jest również preferowany przez wielu fundatorów badań. Licencja ta umożliwia czytelnikom kopiowanie i redystrybucję materiału na dowolnym nośniku i w dowolnym formacie, a także zmienianie, przekształcanie lub budowanie na nim materiału, w tym do użytku komercyjnego, pod warunkiem wskazania oryginalnego autora.
Bibliografia
Tobota K., Chmielewski T., Chmielewski M., Microstructure and selected properties of Ni-Cr-Re coatings deposited by means of HVOF thermal spraying. Welding Technology Review, 2019, Vol. 91(1), 2530. https://doi.org/10.26628/wtr.v91i1.1000 DOI: https://doi.org/10.26628/wtr.v91i1.1000
Bhushan B., Principles and Applications of Tribology, 2013, New York, John Wiley & Sons, 980. DOI: https://doi.org/10.1002/9781118403020
Marcos Sá DeSousa J., Ratusznei F., Pereira R., de Medeiros Castro R., Mercado Curib E.I., Abrasion resistance of Ni-Cr-B-Si coating deposited by laser cladding process. Tribology International, 2020, Vol. 143, 106002. https://doi.org/10.1016/j.triboint.2019.106002. DOI: https://doi.org/10.1016/j.triboint.2019.106002
Shveikin G.P., Sokolova N.V., Rudenskaya N.A., Kuzmin V.I., Supersonic plasma and wear-resistant nickel alloy coatings. Доклады Ðкадемии Ðаук, 2015, Vol. 463(3), 309312. DOI: https://doi.org/10.1134/S001250081507006X
Ilushchenko A. F., Manoylo E. D., Andreev M. A., Onashchenko F. E., Flame spraying of coatings of self-fluxing alloys. Welding International, 2017, Vol. 31(11), 887-891. https://doi.org/10.1080/09507116.2017.1349279 DOI: https://doi.org/10.1080/09507116.2017.1349279
Hejwowski T., Erosive and abrasive wear resistance of overlay coatings. Vacuum, 2008, Vol. 83(1), 166170. DOI: 10.1016/j.vacuum.2008.03.029 DOI: https://doi.org/10.1016/j.vacuum.2008.03.029
Majewski D., Hejwowski T., Łukasik D., The influence of microstructure of arc sprayed coatings on wear resistance. Advances in Science and Technology. Research Journal, 2018, Vol. 12(1), 285292. https://doi.org/10.12913/22998624/86210 DOI: https://doi.org/10.12913/22998624/86210
Jimneza H., Olayaa J.J., Alfonsob J.E., Pineda-Vargas C.A., Corrosion resistance of Ni-based coatings deposited by spray and fuse technique varying oxygen flow. Surface and Coatings Technology, 2017, Vol. 321, 341349. https://doi.org/10.1016/j.surfcoat.2017.04.068. DOI: https://doi.org/10.1016/j.surfcoat.2017.04.068
Bęczkowski R., Gucwa M., Qualifying of hardfacing surfacing layers operating under conditions of the cement industry. Welding Technology Review, 2015, Vol. 87(9), 4346. https://doi.org/10.26628/wtr.v87i9.450
Dorfman M.R., Thermal Spray Coatings. Handbook of Environmental Degradation of Materials (Third Edition), 2018, DOI: https://doi.org/10.1016/B978-0-323-52472-8.00023-X
Kondej A., Babul T., Microstructure of the Ni-Cr-B-Si coating obtained in surfacing process. Welding Technology Review, 2016, Vol. 88(3), 2326. DOI: https://doi.org/10.26628/ps.v88i3.574