Flexible system for micro-clinching processes design and analysis
##plugins.themes.bootstrap3.article.main##
Abstrakt
With the development of microprocessors, actuators and structural micro-components, new concepts of micro-electro-mechanical systems/machines are constantly being introduced. One of the consequences of this tendency is seeking for best techniques to connect metal micro-components. Because of tools simplicity, no additional fastening parts and the undisturbed structure of the material, clinching appears to be a promising method for joining in micro-scale. A procedure for the analysis of micro-clinching process is proposed in the paper, and unique, support flexible tooling system designed. This system allows to easily change key parameters of the process. With the use of flexible micro-tooling, a successful micro-clinching of silver sheets of thickness 0.18 mm has been conducted. An effective numerical method - Rapid Numerical Strength Test - for modelling the process of tearing the joints has been presented. Compliance of key phenomena recognized in modelling with experimental results was obtained.
Pobrania
##plugins.themes.bootstrap3.article.details##
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Artykuły czasopisma Welding Technology Review (Przegląd Spawalnictwa) publikowane są w otwartym dostępie na licencji CC BY (licencja Creative Commons Uznanie autorstwa 4.0 Międzynarodowe). Licencja CC BY jest najbardziej otwartą dostępną licencją i uważaną za „złoty standard” w formule otwartego dostępu; jest również preferowany przez wielu fundatorów badań. Licencja ta umożliwia czytelnikom kopiowanie i redystrybucję materiału na dowolnym nośniku i w dowolnym formacie, a także zmienianie, przekształcanie lub budowanie na nim materiału, w tym do użytku komercyjnego, pod warunkiem wskazania oryginalnego autora.
Bibliografia
Lee S.J., Chang-Chien A., Cha S.W., OHayre R., Park Y.I., Saito Y., et al., Design and fabrication of a micro fuel cell array with ‘flip-flop interconnection. Journal of Power Sources Internet, 2002, Vol. 112(2), 4108. DOI: https://doi.org/10.1016/S0378-7753(02)00393-2
Khanna R., MEMS fabrication perspectives from the MIT Microengine Project. Surface and Coatings Technology Internet, 2003, Vol. 163164, 27380. DOI: https://doi.org/10.1016/S0257-8972(02)00637-0
Rachkovskij D.A., Kussul E.M., Talayev S.A., Heat exchange in short microtubes and micro heat exchangers with low hydraulic losses. Microsystem Technologies Internet, 1998, Vol. 4(3), 1518. DOI: https://doi.org/10.1007/s005420050120
Aoki I., Takahashi T., Mihara S., Yamagata Y., Higuchi T., Trial production of medical micro-tool by metal deformation processes using moulds. Proc. of the IEEE Micro Electro Mechanical Systems Internet, 1995, 3449.
Chován T., Guttman A., Microfabricated devices in biotechnology and biochemical processing. Trends in Biotechnology Internet, 2002, Vol. 20(3), 11622. DOI: https://doi.org/10.1016/S0167-7799(02)01905-4
Rosen J., Hannaford B., Satava R.M., Surgical robotics: Systems applications and visions. Surgical Robotics: Systems Applications and Visions Internet, 2011, 1819. DOI: https://doi.org/10.1007/978-1-4419-1126-1
Temel F.Z., Yesilyurt S., Simulation-based analysis of micro-robots swimming at the center and near the wall of circular mini-channels. Microfluidics and Nanofluidics Internet, 2013, Vol. 14(12), 28798. DOI: https://doi.org/10.1007/s10404-012-1047-y
Liang Q., Zhang D., Coppola G., Wang Y., Wei S., Ge Y., Multi-dimensional MEMS/micro sensor for force and moment sensing: A review. IEEE Sensors Journal Internet, 2014, Vol. 14(8), 264357. DOI: https://doi.org/10.1109/JSEN.2014.2313860
Shirmohammadi D., Movahedi M., Pouranvari M., Resistance spot welding of martensitic stainless steel: Effect of initial base metal microstructure on weld microstructure and mechanical performance. Materials Science and Engineering A, 2017, Vol. 703(June), 15461. https://doi.org/10.1016/j.msea.2017.07.067 DOI: https://doi.org/10.1016/j.msea.2017.07.067
Wei S.T., Liu R.D., Lv D., Xu R.J., Lin L., Guo J.Y., et al., Study on fibre laser spot welding of TRIP980 steel. Materials Science and Technology (United Kingdom) Internet, 2015, Vol. 31(11), 12711281. DOI: https://doi.org/10.1179/1743284714Y.0000000681
Pardal G., Meco S., Dunn A., Williams S., Ganguly S., Hand D.P., et al., Laser spot welding of laser textured steel to aluminium. Journal of Materials Processing Technology, 2017, Vol. 241, 2435. DOI: https://doi.org/10.1016/j.jmatprotec.2016.10.025
https://doi.org/10.1016/j.jmatprotec.2016.10.025
Liu B., Tian Y., Wang C., An R., Liu Y., Extremely fast formation of [Formula presented] intermetallic compounds in Cu/Sn/Cu system via a micro-resistance spot welding process. Journal of Alloys and Compounds, 2016, Vol. 687, 667673. https://doi.org/10.1016/j.jallcom.2016.06.184 DOI: https://doi.org/10.1016/j.jallcom.2016.06.184
Hozoorbakhsh A., Ismail M.I.S., Sarhan A.A.D.M., Bahadoran A., Aziz N.B.A., An investigation of heat transfer and fluid flow on laser micro-welding upon the thin stainless steel sheet (SUS304) using computational fluid dynamics (CFD). International Communications in Heat and Mass Transfer, 2016, Vol. 75, 328340. https://doi.org/10.1016/j.icheatmasstransfer.2016.05.008 DOI: https://doi.org/10.1016/j.icheatmasstransfer.2016.05.008
Chen F., Gao X.P., Yue X.K., Tong G.Q., Effects of welding parameters on electrode element diffusion during micro-resistance spot welding. International Journal of Advanced Manufacturing Technology Internet, 2018, Vol. 95(58), 15971606. DOI: https://doi.org/10.1007/s00170-017-1240-y
Loginova I., Khalil A., Pozdniakov A., Solonin A., Zolotorevskiy V., Effect of pulse laser welding parameters and filler metal on microstructure and mechanical properties of Al-4.7Mg-0.32Mn-0.21Sc-0.1Zr alloy. Metals Internet, 2017, Vol. 7(12), 19. DOI: https://doi.org/10.3390/met7120564
Skowrońska B., Chmielewski T., Golański D., Szulc J., Weldability of S700MC steel welded with the hybrid plasma + MAG method. Manufacturing Review Internet, 2020, Vol. 7, 4. DOI: https://doi.org/10.1051/mfreview/2020001
Martinson P., Daneshpour S., Koçak M., Riekehr S., Staron P., Residual stress analysis of laser spot welding of steel sheets. Materials and Design, 2009, Vol. 30(9), 33519. https://doi.org/10.1016/j.matdes.2009.03.041 DOI: https://doi.org/10.1016/j.matdes.2009.03.041
Di Lorenzo G., Landolfo R., Shear experimental response of new connecting systems for cold-formed structures. Journal of Constructional Steel Research Internet, 2004, Vol. 60(35), 561579. DOI: https://doi.org/10.1016/S0143-974X(03)00130-5
Presz W., Cakco R., Application of complex micro-die for extrusion of micro-rivets for micro-joining. METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings Internet, 2017, Vol. 2017-Januar, 51420.
Presz W., Planetary riveting of electric bimetallic micro-contacts. Procedia Manufacturing, 2019, Vol. 27, 8390. https://doi.org/10.1016/j.promfg.2018.12.048 DOI: https://doi.org/10.1016/j.promfg.2018.12.048
Presz W., Cacko R., Influence of micro-rivet manufacturing process on quality of micro-joint.In: AIP Conference Proceedings Internet, 2011. DOI: https://doi.org/10.1063/1.3589571
Presz W., Cacko R., Analysis of the influence of a rivet yield stress distribution on the micro-SPR joint - initial approach. Archives of Civil and Mechanical Engineering Internet, 2010, Vol. 10(4). DOI: https://doi.org/10.1016/S1644-9665(12)60032-6
Lee C.J., Lee J.M., Ryu H.Y., Lee K.H., Kim B.M., Ko D.C., Design of hole-clinching process for joining of dissimilar materials - Al6061-T4 alloy with DP780 steel, hot-pressed 22MnB5 steel, and carbon fiber reinforced plastic. Journal of Materials Processing Technology, 2014, Vol. 214(10), 21692178. DOI: https://doi.org/10.1016/j.jmatprotec.2014.03.032
https://doi.org/10.1016/j.jmatprotec.2014.03.032
Lambiase F., Di Ilio A., Paoletti A., Joining aluminium alloys with reduced ductility by mechanical clinching. International Journal of Advanced Manufacturing Technology Internet, 2015, Vol. 77(58), 12951304. DOI: https://doi.org/10.1007/s00170-014-6556-2
Chmielewski T., Hudycz M., Krajewski A., Salaciński T., Skowrońska B., Świercz R., Structure investigation of titanium metallization coating deposited onto AlN ceramics substrate by means of friction surfacing process. Coatings Internet, 2019, Vol. 9(12). DOI: https://doi.org/10.3390/coatings9120845
Chmielewski T., Siwek P., Chmielewski M., Piątkowska A., Grabias A., Golański D., Structure and selected properties of arc sprayed coatings containing in-situ fabricated Fe-Al intermetallic phases. Metals Internet, 2018, Vol. 8(12). DOI: https://doi.org/10.3390/met8121059
Kim J.B., Kim H.K., Fatigue behaviour of clinched joints in a steel sheet. Fatigue and Fracture of Engineering Materials and Structures Internet, 2015, Vol. 38(6), 661672. DOI: https://doi.org/10.1111/ffe.12263
Vitzthum S., Hiller M., Volk W., Experimental investigation of the scalability of roller-clinching processes with regard to joint strength and failure mode. Materialwissenschaft und Werkstofftechnik Internet, 2019, Vol. 50(8), 10151026. DOI: https://doi.org/10.1002/mawe.201900022
Abe Y., Ishihata S., Maeda T., Mori K.I., Mechanical clinching process using preforming of lower sheet for improvement of joinability. Procedia Manufacturing, 2018, Vol. 15, 13601367. DOI: https://doi.org/10.1016/j.promfg.2018.07.347
https://doi.org/10.1016/j.promfg.2018.07.347
Gerstmann T., Awiszus B., Recent developments in flat-clinching. Computational Materials Science, 2014, Vol. 81, 3944. https://doi.org/10.1016/j.commatsci.2013.07.013 DOI: https://doi.org/10.1016/j.commatsci.2013.07.013
Cumin J., Samardžić I., DunÄ‘er M., Mechanical clinching process stress and strain in the clinching of EN-AW5754 (AlMg3), and EN AW-5019 (AlMg5) metal plates. Metalurgija Internet, 2018, Vol. 57(12), 107110.
Mucha J., Kašcák L., Spišák E., Joining the car-body sheets using clinching process with various thickness and mechanical property arrangements. Archives of Civil and Mechanical Engineering Internet, 2011, Vol. 11(1), 135148. DOI: https://doi.org/10.1016/S1644-9665(12)60179-4
Geiger M., Kleiner M., Eckstein R., Tiesler N., Engel U., Microforming. CIRP Annals - Manufacturing Technology Internet, 2001, Vol. 50(2), 44562. DOI: https://doi.org/10.1016/S0007-8506(07)62991-6
Eichenhueller B., Egerer E., Engel U., Microforming at elevated temperature - Forming and material behaviour. International Journal of Advanced Manufacturing Technology Internet, 2007, Vol. 33(12), 119124. DOI: https://doi.org/10.1007/s00170-006-0731-z
Wang C., Guo B., Shan D., Friction related size-effect in microforming -A review. Manufacturing Review Internet, 2014, Vol. 1. DOI: https://doi.org/10.1051/mfreview/2014022
Ran J.Q., Fu M.W., Chan W.L., The influence of size effect on the ductile fracture in micro-scaled plastic deformation. International Journal of Plasticity Internet, 2013, Vol. 41, 6581. DOI: https://doi.org/10.1016/j.ijplas.2012.09.002
Raulea L. V., Goijaerts A.M., Govaert L.E., Baaijens F.P.T., Size effects in the processing of thin metal sheets. Journal of Materials Processing Technology Internet, 2001, Vol. 115(1), 4448. DOI: https://doi.org/10.1016/S0924-0136(01)00770-1
W P., A R., The influence of grain size on surface quality of microformed components.In: Juster N, Rosochowski A, editors. The 9th International Conference on Material Forming: ESAFORM 2006 Internet, Glasgow, U.K, Publishing House ‘Akapit, Krokow, Poland, 2006. p. 587590.
Muster A., Presz W., Influence of initial surface roughness on galling behaviour of a steel-steel couple. Scandinavian Journal of Metallurgy Internet, 1999.
Presz W., Rosochowska M., Application of semi-physical modeling of interface surface roughness in design of pre-stressed microforming dies. Procedia Engineering Internet, 2017, Vol. 207(September), 10041009. DOI: https://doi.org/10.1016/j.proeng.2017.10.866
Presz W., Scale effect in design of the pre-stressed micro-dies for microforming. Computer Methods in Materials Science Internet, 2016, Vol. 16(4), 196203.
Kocańda A., Presz W., Adamczyk G., Czyzewski P., Mazurek W., Contact pressure distribution in upsetting of compound metals. Journal of Materials Processing Technology Internet, 1996, Vol. 60(14). DOI: https://doi.org/10.1016/0924-0136(96)02352-7
Lee C.J., Kim J.Y., Lee S.K., Ko D.C., Kim B.M., Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets. Journal of Mechanical Science and Technology Internet, 2010, Vol. 24(1), 123126. DOI: https://doi.org/10.1007/s12206-009-1118-5
Lambiase F., Di Ilio A., Optimization of the clinching tools by means of integrated fe modeling and artificial intelligence techniques. Procedia CIRP, 2013, Vol. 12, 1638. https://doi.org/10.1016/j.procir.2013.09.029 DOI: https://doi.org/10.1016/j.procir.2013.09.029
Roux E., Bouchard P.O., Kriging metamodel global optimization of clinching joining processes accounting for ductile damage. Journal of Materials Processing Technology, 2013, Vol. 213(7), 10381047. DOI: https://doi.org/10.1016/j.jmatprotec.2013.01.018
https://doi.org/10.1016/j.jmatprotec.2013.01.018
Wang X., Li X., Shen Z., Ma Y., Liu H., Finite element simulation on investigations, modeling, and multiobjective optimization for clinch joining process design accounting for process parameters and design constraints. International Journal of Advanced Manufacturing Technology Internet, 2018, Vol. 96(912), 34813501. DOI: https://doi.org/10.1007/s00170-018-1708-4
Engel U., Tribology in microforming. Wear Internet, 2006, Vol. 260(3), 265273. DOI: https://doi.org/10.1016/j.wear.2005.04.021
Presz W., Rosochowski A., The influence of grain size on surface quality of microformed components.In: The 9th International Conference on Material Forming: ESAFORM 2006, Glasgow, UK Internet, Akapit, Kraków, Poland, 2006. p. 587590.
Paćko P., Uhl T., Multiscale approach to structure damage modelling. Journal of Theoretical and Applied Mechanics Internet, 2011, Vol. 49(1), 243264.
Christiansen P., Nielsen C. V., Martins P.A.F., Bay N., Predicting the onset of cracks in bulk metal forming by ductile damage criteria. Procedia Engineering, 2017, Vol. 207, 20482053. DOI: https://doi.org/10.1016/j.proeng.2017.10.1106
https://doi.org/10.1016/j.proeng.2017.10.1106
Presz W., Cacko R., Bimetallic micro-punches for micro-blanking processes. Archives of Metallurgy and Materials Internet, 2018, Vol. 63(1), 2934.
Cacko R., Czyżewski P., Kocańda A. Initial optimization of self-piercing riveting process by means of FEM. Steel Grips, 2004, 307-310.