Welding of DOCOL 1200M using micro-jet cooling
##plugins.themes.bootstrap3.article.main##
Abstrakt
In welding elements of the supporting structure of the means of transport, attention is paid to the high strength and good plastic properties of the welded joint. In the construction of transport means, DOCOL 1200M steel from the AHSS group is increasingly used due to their high tensile strength of steel at the level of 1200 MPa. The welds have much lower strength than the native material. In this paper, it was decided to check the weldability of DOCOL 1200M steel with the use of micro-jet cooling
Pobrania
##plugins.themes.bootstrap3.article.details##
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Artykuły czasopisma Welding Technology Review (Przegląd Spawalnictwa) publikowane są w otwartym dostępie na licencji CC BY (licencja Creative Commons Uznanie autorstwa 4.0 Międzynarodowe). Licencja CC BY jest najbardziej otwartą dostępną licencją i uważaną za „złoty standard” w formule otwartego dostępu; jest również preferowany przez wielu fundatorów badań. Licencja ta umożliwia czytelnikom kopiowanie i redystrybucję materiału na dowolnym nośniku i w dowolnym formacie, a także zmienianie, przekształcanie lub budowanie na nim materiału, w tym do użytku komercyjnego, pod warunkiem wskazania oryginalnego autora.
Bibliografia
Grajcar A., Różański M., Weldability of high-strength AHSS multiphase steels (in polish), Welding Technology Review, 2014, Vol. 86(3), 22-27. DOI:10.26628/ps.v86i3.103 DOI: https://doi.org/10.26628/ps.v86i3.103
Lee C.-H., Shin H.-S., Park K.-T., Evaluation of high strength TMCP steel weld for use in cold regions, Journal of Constructional Steel Research, 2012, Vol. 74, 134-139. DOI: 10.1016/j.jcsr.2012.02.012 DOI: https://doi.org/10.1016/j.jcsr.2012.02.012
Krajewski S., Nowacki J., Microstructure and properties of high strength AHSS steel, Welding Technology Review, 2011, Vol. 83(7), 1-20. DOI: https://doi.org/10.26628/ps.v83i7.532
Górka J., Ozgowicz W., Structure and properties of DOCOL 1200M steel spot welds, Spajanie Materiałów Konstrukcyjnych, 2019, Vol. 1(39), 26-31.
Lee J., Asim K., Pan J., Modeling of failure mode of laser welds in lap-shear speciments of HSLA steel sheets, Engineering Fracture Mechanics, 2011, Vol. 78(1), 347-396. DOI: 10.1016/j.engfracmech.2010.10.011 DOI: https://doi.org/10.1016/j.engfracmech.2010.10.011
Celin R., Burja J., Effect of cooling rates on the weld heat affected zone coarse grain microstructure, Metallurgical and Materials Engineering, 2018, Vol. 24(1), 37-44. DOI: 10.30544/342 DOI: https://doi.org/10.30544/342
Skowrońska B., Chmielewski T., Golański D., Szulc Jacek, Weldability of S700MC steel welded with the hybrid plasma+MAG method, Manufacturing Review, 2020, Vol. 7(4), 1-15. DOI:10.1051/mfreview/2020001 DOI: https://doi.org/10.1051/mfreview/2020001
Szczucka-Lasota B., Węgrzyn T., Stanik Z., Piwnik J., Sidun P., Selected parameters of micro-jet cooling gases in hybrid spraying process, Arch. of Metallurgy and Materials, 2016, Vol. 61(2), 621624.
DOI: 10.1515/amm-2016-0105 DOI: https://doi.org/10.1515/amm-2016-0105
Skowrońska B., Szulc J., Chmielewski T., Sałaciński T., Swiercz R., Properties and microstructure of hybrid Plasma+MAG welded joints of thermomechanically treated S700MC steel, Proceedings of the 27th Anniversary International Conference on Metallurgy and Materials (METAL), Brno, Czech Republic, 25 May 2018.
Darabi J., Ekula K., Development of a chip-integrated micro cooling device, Microelectronics Journal, Vol. 34(11), 1067-1074. DOI: 10.1016/j.mejo.2003.09.010 DOI: https://doi.org/10.1016/j.mejo.2003.09.010
Hadryś D., Impact load of welds after micro-jet cooling, Archives of Metallurgy and Materials, 2015, Vol. 60(4), 2525-2528. DOI: 10.1515/amm-2015-0409 DOI: https://doi.org/10.1515/amm-2015-0409
Muszynski T., Mikielewicz D., Structural optimization of microjet array cooling system, Applied Thermal Engineering, 2017, Vol. 123, 103-110. DOI: 10.1016/j.applthermaleng.2017.05.082 DOI: https://doi.org/10.1016/j.applthermaleng.2017.05.082
Walsh S. M., Smith J. P., Browne E. A., Hennighausen T. W., Malouin B. A., Practical Concerns for Adoption of Microjet Cooling, Conference Proceedings, ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, 2018. DOI: 10.1115/IPACK2018-8468 DOI: https://doi.org/10.1115/IPACK2018-8468
https://www.yumpu.com/docol-m-zimnowalcowana-stal-martenzytyczna-ssab
Jaeschke B., Węglowski M., Chmielewski T., Current State and Development Opportunities of Dynamic Power Source for GMA Welding Processes, Journal of Manufacturing Technologies, 2017, Vol. 42(1), 23-30.
Ahiale G. K., Oh Y.-J., Microstructure and fatigue performance of buttwelded joints in advanced high-strength steels, Materials Science & Engineering A, 2014, Vol. 597, 342-348. DOI: 10.1016/j.msea.2014.01.007 DOI: https://doi.org/10.1016/j.msea.2014.01.007
Sharma R. S., Molian P., Weldability of advanced high strength steels using an Yb:YAG disk laser, Journal of Materials Processing Technology, 2011, Vol. 211(11), 1888-1897. DOI: 10.1016/j.jmatprotec.2011.06.009 DOI: https://doi.org/10.1016/j.jmatprotec.2011.06.009