The microstructure and selected mechanical properties of Al2O3 + 3 wt.% TiO2 plasma sprayed coatings
##plugins.themes.bootstrap3.article.main##
Abstrakt
The Al2O3+TiO2 coatings are of the interest of surface engineering due to their high hardness and wear resistance but also increased toughness, when compared to pure Al2O3 ones. This article describes the deposition of Al2O3+3 wt.% TiO2 coatings by Atmospheric Plasma Spraying (APS) technique. The commercial AMI 6300.1 powder (-45 + 22 μm) was used as a feedstock. The 2k+1 spraying experiment, based on two variables, namely spray distance and torch velocity, was designed. The samples were characterized in the terms of morphology, microstructure, microhardness and roughness. It was observed that the shorter spray distance resulted in lower porosity, higher microhardness and lower roughness of coatings.
Pobrania
##plugins.themes.bootstrap3.article.details##
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Artykuły czasopisma Welding Technology Review (Przegląd Spawalnictwa) publikowane są w otwartym dostępie na licencji CC BY (licencja Creative Commons Uznanie autorstwa 4.0 Międzynarodowe). Licencja CC BY jest najbardziej otwartą dostępną licencją i uważaną za „złoty standard” w formule otwartego dostępu; jest również preferowany przez wielu fundatorów badań. Licencja ta umożliwia czytelnikom kopiowanie i redystrybucję materiału na dowolnym nośniku i w dowolnym formacie, a także zmienianie, przekształcanie lub budowanie na nim materiału, w tym do użytku komercyjnego, pod warunkiem wskazania oryginalnego autora.
Bibliografia
Fauchais P., Vardelle A.M., Dussoubs B., Quo Vadis Thermal Spraying? Journal of Thermal Spray Technology, 2001, Vol. 10(1), 4466. DOI: https://doi.org/10.1361/105996301770349510
Global Powder Coatings Market Set for Rapid Growth, To Reach Around USD 11.0 Billion by 2020. Available online: https://www.marketresearchstore.com/news/global-powder-coatings-market-179 (accessed on 19.02.2019)
Oerlikon Metco, Material Product Data Sheet Alumina 3% Titania Thermal Spray Powders 2019.
Toma F.-L., Berger L.-M., Stahr C.C., Naumann T., Langner S., Microstructures and functional properties of suspension-sprayed Al2O3 and TiO2 coatings: an overview, Journal of Thermal Spray Technology, 2010, Vol. 19(12), 262-274. DOI: https://doi.org/10.1007/s11666-009-9417-z
Oerlikon Metco, Material Product Data Sheet Alumina 13% Titania Thermal Spray Powders 2019.
Oerlikon Metco, Material Product Data Sheet Alumina 40% Titania Thermal Spray Powders 2019.
Berger L.-M., Sempf K., Sohn Y.J., Vassen R., Influence of Feedstock Powder Modification by Heat Treatments on the Properties of APS-Sprayed Al2O3-40% TiO2 Coatings, Journal of Thermal Spray Technology, 2018, Vol. 27(4), 654-666. DOI: https://doi.org/10.1007/s11666-018-0716-0
Hejwowski T., Investigations into the degradation mechanism of thermal barrier applied in IC engine, Journal of KONES, 2009, Vol. 16(3), 129134.
Pierlot C., Pawłowski L., Bigan M., Chagnon P., Design of experiments in thermal spraying: A review, Surface and Coatings Technology, 2008, Vol. 202(18), 44834490. DOI: https://doi.org/10.1016/j.surfcoat.2008.04.031
Material Product Datasheet Euromat AMI 6300.1.
Candidato R., Sokołowski P., Łatka L., Kozerski S., Pawłowski L., Denoirjean A., Plasma spraying of hydroxyapatite coatings using powder, suspension and solution feedstocks, Welding Technology Review 2015, Vol. 87(10), 6471. DOI: https://doi.org/10.26628/ps.v87i10.491
Pawłowski L., Finely grained nanometric and submicrometric coatings by thermal spraying: A review, Surface and Coatings Technology, 2008, Vol. 202(18), 43184328. DOI: https://doi.org/10.1016/j.surfcoat.2008.04.004
Praxair Surface Technologies, Model SG-100 Plasma Spray Gun Operators Manual 2011.
ASTM E2109-01(2014), Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings, ASTM International, West Conshohocken, PA, 2014.
Lin X., Zeng Y., Lee S.W., Ding C., Characterization of alumina-3 wt.% titania coatings prepared by plasma spraying of nanostructured powders, Journal of the European Ceramic Society, 2004, Vol. 24(4), 627634. DOI: https://doi.org/10.1016/S0955-2219(03)00254-1
Sahab A.R.M., Saad N.H., Kasolang S., Saedon J., Impact of Plasma Spray Variables on mechanical and Wear Behaviour of Plasma Sprayed Al2O3 3%wt TiO2 Coating in Abrasion and Erosion Application, Procedia Engineering, 2012, Vol. 41, 16891695. DOI: https://doi.org/10.1016/j.proeng.2012.07.369
Tian W., Wang Y., Yang Y., Three body abrasive wear characteristics of plasma sprayed conventional and nanostructured Al2O3-13%TiO2 coatings, Tribology International, 2010, Vol. 43(5-6), 876881. DOI: https://doi.org/10.1016/j.triboint.2009.12.023
Islak S., Buytoz S., Ersoz E., Orhan N., Stokes J., Salem Hashmi M., Somunkiran I., Tosun N., Effect on microstructure of TiO2 rate in Al2O3-TiO2 composite coating produced using plasma spray method, Optoelectronics and Advanced Materials Rapid Communications, 2012, Vol. 6(9-10), 844849.
Singh V.P., Sil A., Jayaganthan R., A study on sliding and erosive wear behaviour of atmospheric plasma sprayed conventional and nanostructured alumina coatings, Materials and Design, 2011, Vol. 32(2), 584591. DOI: https://doi.org/10.1016/j.matdes.2010.08.019
Vijay M., Selvarajan V., Yugeswaran S., Ananthapadmanabhan P.V., Sreekumar K.P., Effect of spraying parameters on deposition efficiency and wear behavior of plasma sprayed alumina-titania composite coatings, Plasma Science and Technology, 2009, Vol.11, 666. DOI: https://doi.org/10.1088/1009-0630/11/6/07