The influence of abrasive finishing conditions on the surface texture of Inconel 939 elements made using the 3D printing LPBF method

##plugins.themes.bootstrap3.article.main##

Ewa Wojtiuk
Joanna Radziejewska
Michał Marczak

Abstrakt




The article presents research on finishing treatment applied to components made of Inconel through 3D printing by Laser Powder Bed Fusion method. Vibration-abrasive machining was carried out using a supporting fluid and various shapes of abrasive. The effects of the processing conditions were analysed based on the surface roughness of the samples and mass loss. The obtained collective results were subjected to comparative analysis with the effects of vibratory-abrasive processing without the use of a processing fluid, as presented in the article. The research has shown that using vibration-abrasive processing, it is possible to reduce the height of surface irregularities by more than three times after four hours of treatment. The intensity of processing was the highest in the first hour of the process. The lowest roughness heights Ra = 1.8 μm were obtained using ceramic balls in the presence of a supporting fluid.




Pobrania

Brak dostępnych danych do wyświetlenia.

##plugins.themes.bootstrap3.article.details##

Jak cytować
[1]
E. Wojtiuk, J. Radziejewska, i M. Marczak, „The influence of abrasive finishing conditions on the surface texture of Inconel 939 elements made using the 3D printing LPBF method”, Weld. Tech. Rev., t. 96, s. 34–40, mar. 2024.
Dział
Original Articles

Bibliografia

Shaikh, A.S.; Rashidi, M.; Minet-Lallemand, K.; Hryha, E. On as-built microstructure and necessity of solution treatment in additively manufactured Inconel 939. Powder Metall. 2023, 66, 3–11, doi:10.1080/00325899.2022.2041787

Diniță, A.; Neacșa, A.; Portoacă, A.I.; Tănase, M.; Ilinca, C.N.; Ramadan, I.N. Additive Manufacturing Post- Processing Treatments, a Review with Emphasis on Mechanical Characteristics. Materials (Basel). 2023, 16, 4610, doi:10.3390/ma16134610

Hosseini, E.; Popovich, V.A. A review of mechanical properties of additively manufactured Inconel 718. Addit. Manuf. 2019, 30, 100877, doi:10.1016/j.addma.2019.100877

González, M.A.; Martínez, D.I.; Pérez, A.; Guajardo, H.; Garza, A. Microstructural response to heat affected zone cracking of prewelding heat-treated Inconel 939 superalloy. Mater. Charact. 2011, 62, 1116–1123, doi:10.1016/j.matchar.2011.09.006

Kanagarajah, P.; Brenne, F.; Niendorf, T.; Maier, H.J. Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading. Mater. Sci. Eng. A 2013, 588, 188–195, doi:10.1016/j.msea.2013.09.025

Shaikh, A.S. Development of a γ’ Precipitation Hardening Ni-Base Superalloy for Additive Manufacturing, Chalmers University of Technology, 2018

Li, X.; Shi, J.J.; Wang, C.H.; Cao, G.H.; Russell, A.M.; Zhou, Z.J.; Li, C.P.; Chen, G.F. Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting. J. Alloys Compd. 2018, 764, 639–649, doi:10.1016/j.jallcom.2018.06.112

Liu, P.; Hu, J.; Sun, S.; Feng, K.; Zhang, Y.; Cao, M. Microstructural evolution and phase transformation of Inconel 718 alloys fabricated by selective laser melting under different heat treatment. J. Manuf. Process. 2019, 39, 226–232, doi:10.1016/j.jmapro.2019.02.029

Lesyk, D.A.; Martinez, S.; Mordyuk, B.N.; Dzhemelinskyi, V. V.; Lamikiz; Prokopenko, G.I. Post-processing of the Inconel 718 alloy parts fabricated by selective laser melting: Effects of mechanical surface treatments on surface topography, porosity, hardness and residual stress. Surf. Coatings Technol. 2020, 381, 125136, doi:10.1016/j.surfcoat.2019.125136

Duda, T.; L. Venkat, R. 3D Metal Printing Technology. In Proceedings of the IFAC Papers Online Conference Paper Archive, 49-29; 2016; pp. 103–110

Serjouei, A.; Libura, T.; Brodecki, A.; Radziejewska, J.; Broniszewska, P.; Pawłowski, P.; Szymczak, T.; Bodaghi, M.; Kowalewski, Z.L. Strength-hardness relationship for AlSi10Mg alloy produced by laser powder bed fusion: An experimental study. Mater. Sci. Eng. A 2022, doi:10.1016/j.msea.2022.144345

Bańkowski, D.; Spadło, S. The influence of abrasive paste on the effects of vibratory machining of brass. Arch. Foundry Eng. 2019, 19, 5–10, doi:10.24425/afe.2019.129622

Kamarudin, K.; Wahab, M.S.; Shayfull, Z.; Ahmed, A.; Raus, A.A. Dimensional Accuracy and Surface Roughness Analysis for AlSi10Mg Produced by Selective Laser Melting (SLM). In Proceedings of the MATEC Web of Conferences; 2016; p. 01077

Tian, Y.; Tomus, D.; Rometsch, P.; Wu, X. Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting. Addit. Manuf. 2017, 13, 103–112, doi:10.1016/j.addma.2016.10.010

Han, X.; Zhu, H.; Nie, X.; Wang, G.; Zeng, X. Investigation on selective laser melting AlSi10Mg cellular lattice strut: Molten pool morphology, surface roughness and dimensional accuracy. Materials (Basel). 2018, 11, 392, doi:10.3390/ma11030392

Damian, B.; Daniel, K.; Piotr, M. Deburring and Smoothing the Edges Using Vibro-abrasive Machining. Procedia Eng. 2017, 192, 28–33, doi:10.1016/j.proeng.2017.06.005

Boschetto, A.; Bottini, L.; Macera, L.; Veniali, F. Post-processing of complex SLM parts by barrel finishing. Appl. Sci. 2020, 10, 1382, doi:10.3390/app10041382

Radziejewska, J.; Marczak, M.; Maj, P.; Głowacki, D. The Influence of Vibro-Assisted Abrasive Processing on the Surface Roughness and Sub-Surface Microstructure of Inconel 939 Specimen Made by LPBF. Materials (Basel). 2023, 16, 7429, doi:10.3390/ma16237429

Woźniak, K. Obróbka powierzchni w wygładzarkach pojemnikowych; 2017; ISBN 978-83-01-19205-1

Metal Solutions: EOS Nickel Alloy IN939 Material Data Sheet Metal Solutions Available online:

https://www.eos.info/05-datasheetimages/Assets_MDS_Metal/EOS_NickelAlloy_IN939/Material_DataSheet_EOS_NickelAlloy_IN939_en.pdf