Mechanical properties investigations of the plasma sprayed coatings based on alumina powder
##plugins.themes.bootstrap3.article.main##
Abstrakt
In this paper Al2O3 + 13 wt% TiO2 ceramic coatings manufactured by Atmospheric Plasma Spraying (APS) have been investigated. The commercial feedstock materials, Metco 6221 (top coat) and Amdry 4535 (bond coat) have been deposited on stainless steel coupons. The main goal of researches was to determine the influence of critical plasma spray parameters (CPSP) on structure and properties of the coatings. In present studies, the electrical power was a variable parameter. Coatings have been characterized by in the terms of microstructure, topography, bond strength adhesion, fracture toughness and wear resistance. As a result, it was observed, that coatings sprayed with higher value of the electrical power exhibit higher mechanical properties due to better cohesion as well as higher melting degree.
Pobrania
##plugins.themes.bootstrap3.article.details##
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Artykuły czasopisma Welding Technology Review (Przegląd Spawalnictwa) publikowane są w otwartym dostępie na licencji CC BY (licencja Creative Commons Uznanie autorstwa 4.0 Międzynarodowe). Licencja CC BY jest najbardziej otwartą dostępną licencją i uważaną za „złoty standard” w formule otwartego dostępu; jest również preferowany przez wielu fundatorów badań. Licencja ta umożliwia czytelnikom kopiowanie i redystrybucję materiału na dowolnym nośniku i w dowolnym formacie, a także zmienianie, przekształcanie lub budowanie na nim materiału, w tym do użytku komercyjnego, pod warunkiem wskazania oryginalnego autora.
Bibliografia
Pawłowski L., The Science and Engineering of Thermal Spray Coatings, 2nd ed., Wiley: Chichester, 2008, ISBN 978-0471-49049-4.
Maruszczyk A., Dudek A., Szala M., Research into Morphology and Properties of TiO2 NiAl Atmospheric Plasma Sprayed Coating. Adv. Sci. Technol. Res. J., 2017, Vol. 11(3), 204210. https://doi.org/10.12913/22998624/76450 DOI: https://doi.org/10.12913/22998624/76450
Góral A., Żórawski W., Charakterystyka mikrostruktury powłok Ni-Al2O3 natryskanych zimnym gazem. Welding Technology Review, 2015, Vol. 87(9), 34-37. https://doi.org/10.26628/wtr.v87i9.448
Szala M., Hejwowski T., Cavitation Erosion Resistance and Wear Mechanism Model of Flame-Sprayed Al2O3-40%TiO2/NiMoAl Cermet Coatings. Coatings, 2018, Vol. 8(7), 254. https://doi.org/10.3390/coatings8070254 DOI: https://doi.org/10.3390/coatings8070254
Aliofkhazraei M., Anti-Abrasive Nanocoatings: Current and Future Applications, Elsevier, 2014, ISBN 978-0-85709-217-5.
Sert Y., Toplan N., Tribological behavior of a plasma-sprayed Al2O3-TiO2-Cr2O3 coating. Materials and Technology, 2013, Vol. 47(2), 181183.
Wang Y.M., Tian H., Shen X.E., Wen L., Ouyang J.H., Zhou Y., Jia D.C., Guo L.X., An elevated temperature infra-red emissivity ceramic coating formed on 2024 aluminium alloy by microarc oxidation. Ceramics International, 2013, Vol. 39(3), 28692875. https://doi.org/10.1016/j.ceramint.2012.09.060 DOI: https://doi.org/10.1016/j.ceramint.2012.09.060
Wang M., Shaw L.L., Effects of the powder manufacturing method on microstructure and wear performance of plasma sprayed aluminatitania coatings. Surface and Coatings Technology, 2007 Vol. 202(1), 3444. https://doi.org/10.1016/j.surfcoat.2007.04.057 DOI: https://doi.org/10.1016/j.surfcoat.2007.04.057
Aruna S.T., Balaji N., Shedthi J., Grips V.K.W., Effect of critical plasma spray parameters on the microstructure, microhardness and wear and corrosion resistance of plasma sprayed alumina coatings. Surface and Coatings Technology, 2012, Vol. 208(15), 92100. https://doi.org/10.1016/j.surfcoat.2012.08.016 DOI: https://doi.org/10.1016/j.surfcoat.2012.08.016
Ibrahim A., Hamdy A.S., Microstructure, Corrosion, and Fatigue Properties of Alumina-Titania Nanostruc-tured Coatings. Journal of Surface Engineered Materials and Advanced Technology, 2011, Vol. 1(3), 101-106. DOI:10.4236/jsemat.2011.13015 DOI: https://doi.org/10.4236/jsemat.2011.13015
Geaman V., Pop M.A., Motoc D.L., Radomir I., Tribological properties of thermal spray coatings. European Scientific Journal, ESJ 2014, Vol. 9(10), 154-159. https://doi.org/10.19044/esj.2013.v9n10p%25p
Yugeswaran S., Selvarajan V., Vijay M., Ananthapadmanabhan P.V., Sreekumar K.P., Influence of critical plasma spraying parameter (CPSP) on plasma sprayed AluminaTitania composite coatings. Ceramics International, 2010, Vol. 36(1), 141149. https://doi.org/10.1016/j.ceramint.2009.07.012 DOI: https://doi.org/10.1016/j.ceramint.2009.07.012
Michalak M., Łatka L., Sokołowski P., Porównanie właściwości mechanicznych powłok natryskiwanych plazmowo proszkowo i z zawiesin. Welding Technology Review, 2017, Vol. 89(10), 56-60. DOI: https://doi.org/10.26628/ps.v89i10.819
https://doi.org/10.26628/wtr.v89i10.819
Chantikul P., Anstis G.R., Lawn B.R., Marshall D.B., A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: II, Strength Method. Journal of the American Ceramic Society, 1981, Vol. 64(9), 539543. https://doi.org/10.1111/j.1151-2916.1981.tb10321.x DOI: https://doi.org/10.1111/j.1151-2916.1981.tb10321.x
Lancaster J.K., The influence of substrate hardness on the formation and endurance of molybdenum disulphide films. Wear, 1967, Vol. 10(2), 103117. DOI:10.1016/0043-1648(67)90082-8. DOI: https://doi.org/10.1016/0043-1648(67)90082-8
Vijay M., Selvarajan V., Yugeswaran S., Ananthapadmanabhan P.V., Sreekumar K.P., Effect of Spraying Parameters on Deposition Efficiency and Wear Behavior of Plasma Sprayed Alumina-Titania Composite Coatings. Plasma Sci. Technol., 2009, Vol. 11(6), 666673. DOI: 10.1088/1009-0630/11/6/07 DOI: https://doi.org/10.1088/1009-0630/11/6/07
Djendel M., Allaoui O., Boubaaya R., Characterization of Alumina-Titania Coatings Produced by Atmospheric Plasma Spraying on 304 SS Steel. Acta Physica Polonica A, 2017, Vol. 132(3), 538540. doi:10.12693/APhysPolA.132.538 DOI: https://doi.org/10.12693/APhysPolA.132.538
Jafarzadeh K., Valefi Z., Ghavidel B., The effect of plasma spray parameters on the cavitation erosion of Al2O3TiO2 coatings. Surface and Coatings Technology, 2010, Vol. 205(7), 18501855. https://doi.org/10.1016/j.surfcoat.2010.08.044 DOI: https://doi.org/10.1016/j.surfcoat.2010.08.044
Wahab J.A., Ghazali M.J., Baharin A.F.S., Microstructure and mechanical properties of plasma sprayed Al2O3 13%TiO2 Ceramic Coating. MATEC Web Conf. 2017, 87, 02027. doi:10.1051/matecconf/20178702027 DOI: https://doi.org/10.1051/matecconf/20178702027
Yılmaz R., Kurt A.O., Demir A., Tatlı Z., Effects of TiO2 on the mechanical properties of the Al2O3TiO2 plasma sprayed coating. Journal of the European Ceramic Society, 2007, Vol. 27(2-3), 13191323. https://doi.org/10.1016/j.jeurceramsoc.2006.04.099 DOI: https://doi.org/10.1016/j.jeurceramsoc.2006.04.099
Łatka L., Niemiec A., Michalak M., Sokołowski P., Tribological properties of Al2O3+ TiO2 coatings manufac-tured by plasma spraying. Tribology, 2019,Vol. 283(1), 1924. doi:10.5604/01.3001.0013.1431 DOI: https://doi.org/10.5604/01.3001.0013.1431
Zhang J., He J., Dong Y., Li X., Yan D., Microstructure and properties of Al2O3-13%TiO2 coatings sprayed using nanostructured powders. Rare Metals, 2007, Vol. 26(4), 391397. https://doi.org/10.1016/S1001-0521(07)60234-4 DOI: https://doi.org/10.1016/S1001-0521(07)60234-4
Jordan E.H., Gell M., Sohn Y.H., Goberman D., Shaw L., Jiang S., Wang M., Xiao T.D., Wang Y., Strutt P., Fabrication and evaluation of plasma sprayed nanostructured aluminatitania coatings with superior properties. Materials Science and Engineering: A, 2001, Vol. 301(1), 8089. https://doi.org/10.1016/S0921-5093(00)01382-4 DOI: https://doi.org/10.1016/S0921-5093(00)01382-4
Ghazali M.J., Forghani S.M., Hassanuddin N., Muchtar A., Daud A.R., Comparative wear study of plasma sprayed TiO2 and Al2O3TiO2 on mild steels. Tribology International, 2016, Vol. 93, B, 681686. https://doi.org/10.1016/j.triboint.2015.05.001 DOI: https://doi.org/10.1016/j.triboint.2015.05.001
Łatka L., Michalak M., Jonda E., Atmospheric Plasma Spraying of Al2O3 + 13% TiO2 Coatings Using External and Internal Injection System. Advances in Materials Science, 2019, Vol. 19(4), 517. https://doi.org/10.2478/adms-2019-0018 DOI: https://doi.org/10.2478/adms-2019-0018
Żórawski W., Góral A., Makrenek M., Zimowski S., Tribological properties of plasma sprayed Al2O3-13TiO2 nanostructured coatings. Tribologia, 2017, 2, 157-165. DOI: https://doi.org/10.5604/01.3001.0010.6342
Çelik İ., Structure and surface properties of Al2O3TiO2 ceramic coated AZ31 magnesium alloy. Ceramics International, 2016, Vol. 42(12), 1365913663. https://doi.org/10.1016/j.ceramint.2016.05.162 DOI: https://doi.org/10.1016/j.ceramint.2016.05.162
Mehar S., Sapate S.G., Vashishtha N., Bagde P., Effect of Y2O3 addition on tribological properties of plasma sprayed Al2O3-13% TiO2 coating. Ceramics International, 2020, Vol. 46(8), B, 1179911810.
https://doi.org/10.1016/j.ceramint.2020.01.214 DOI: https://doi.org/10.1016/j.ceramint.2020.01.214
Normand B., Fervel V., Coddet C., Nikitine V., Tribological properties of plasma sprayed aluminatitania coatings: role and control of the microstructure. Surface and Coatings Technology, 2000, Vol. 123(2-3), 278287. https://doi.org/10.1016/S0257-8972(99)00532-0 DOI: https://doi.org/10.1016/S0257-8972(99)00532-0
Wang Y., Jiang S., Wang M., Wang S., Xiao T.D., Strutt P.R., Abrasive wear characteristics of plasma sprayed nanostructured alumina/titania coatings. Wear, 2000, Vol. 237(2), 176185. https://doi.org/10.1016/S0043-1648(99)00323-3 DOI: https://doi.org/10.1016/S0043-1648(99)00323-3
Rigney D.A., Division A.S. for M.M.S., AIME, M.S. of Fundamentals of friction and wear of materials: papers presented at the 1980 ASM Materials Science Seminar, 4-5 October 1980, Pittsburgh, Pennsylvania, American Society for Metals, 1981, ISBN 978-0-87170-115-2.