Development of a repair process for manmade structures in space by using aluminium brazing and friction stir spot welding
Main Article Content
Abstract
Small-sized parts and micrometeoroids impacts represent an increasing threat to artificial components/structures. The damages caused by them can be fixed using e.g., mechanical fixture with epoxy adhesive. However, the repair process is costly and only intended for a temporary fixing the penetration. In order to increase the life time of the repair, an approach for a more reliable process using similar materials is needed. The objective of this work is to develop a process for repairing manmade structures in space by generating joint properties similar to the base material. In this work, two approaches for repairing complex structures were considered. The first approach aims to fill a hole using liquid aluminium phases by brazing, and the second approach aims to fill the holes by a solid-state process (friction stir spot welding). In this study, different binding mechanisms of these two approaches were analyzed preliminarily by means of mechanical and/or metallographic characterization under terrestrial, controlled atmosphere conditions. Both concepts are proven feasible under these conditions. It has been shown that it is possible to realize a good filling of the hole with the investigated materials and under selected process conditions with both presented concepts.
Downloads
Article Details
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Welding Technology Review (WTR) articles are published open access under a CC BY licence (Creative Commons Attribution 4.0 International licence). The CC BY licence is the most open licence available and considered the industry 'gold standard' for open access; it is also preferred by many funders. This licence allows readers to copy and redistribute the material in any medium or format, and to alter, transform, or build upon the material, including for commercial use, providing the original author is credited.
References
Christiansen E.L., Robinson J.H., Crews J.L. et al., Space station freedom debris protection techniques, Advances in Space Research, 1993, Vol. 13(8) 191-200. DOI: 10.1016/0273-1177(93)90590-8
Barth J.L., Space and Atmospheric Environments: From Low Earth Orbits to Deep Space, In: Kleiman J.I., Iskanderova Z. (eds), Protection of Materials and Structures from Space Environment, 2004, Vol. 5, Kluwer Academic Publishers, Dordrecht, 729.
Christiansen E., MMOD Protection and Degration Effects for Thermal Control System, 2014.
Roos A., Grundlegende Untersuchung über ein neues Schweißverfahren namens HFDB (Hybrid Friction Diffusion Bonding), GKSS-Forschungszentrum Geesthacht GmbH, 2010, Geesthacht.
Paton B.E., Space: Technologies, materials, structures, Welding and allied processes, 2003, Vol. 2, Taylor & Francis, London, New York.
Jiang X.-X., Lucier L., Nikanpour D. et al., Determination of the Energy Level of the Atomic Oxygen Flux Generated by the Space Simulation Apparatus Using a Thermal Modeling Method, In: Kleiman J.I., Iskanderova Z. Protection of Materials and Structures from Space Environment, 2004, Vol. 5, Kluwer Academic Publishers, Dordrecht, 359-366.
Robertson S.A., Marshall Researchers Developing Patch Kit to Mitigrate ISS Impact Damage, The Orbital Debris Quarterly News, 1999, Vol. 4(4).
Chaudhary R. Variability reduction and experimental techniques for improving performance of the International Space Station Kit for external Repair of Module Impacts, AIP Conference Proceedings, 2001, 562-567.
Christiansen E.L., Nagy K., Lear D.M. et al., Space station MMOD shielding, Acta Astronautica, 2009, Vol. 65(7-8), 921-929. DOI: 10.1016/j.actaastro.2008.01.046
Yu C.-N., Wu Y., Sekulic D.P. Capillary Flow on an Aluminium Brazing Sheet in a Gravity Field: A Phenomenological Study, International Brazing and Soldering Conference, 2018, 29-35.
Yan Q., Zhang X., Wang T. et al., Effect of hot working process on the mechanical properties of tungsten materials, Journal of Nuclear Materials, 2013, Vol. 442(1-3), S233-S236. DOI: 10.1016/j.jnucmat.2013.01.307
Mirski Z., Pabian J., Modern trends in production of brazed heat exchangers for automotive industry, Welding Technology Review, 2017, Vol. 89(8). DOI: 10.26628/wtr.v89i8.798
Grätzel M., Regensburg A., Hasieber M. et al., Scaling effects during friction stir welding of aluminium alloys with reduced tool aspect ratios, Weld World, 2019, Vol. 63(2), 337-347. DOI: 10.1007/s40194-018-0666-7
Zhang Y.N., Cao X., Larose S. et al., Review of tools for friction stir welding and processing, Canadian Metallurgical Quarterly, 2012, Vol. 51(3), 250-261. DOI: 10.1179/1879139512Y.0000000015
Orman L., Swiderski H.W., Lauzon D., Brazing of Aluminium Alloys with Higher Magnesium Content using Non-Corrosive Fluxes, Aluminium Brazing - News, Knowledge & Technology http://www.aluminium-brazing.com, accessed 04.15.2019.
Garcia J., Massoulier C., Faille P., Brazeability of Aluminium Alloys Containing Magnesium by CAB Process Using Cesium Flux, SAE Technical Paper, 2001-01-1763. DOI: 10.4271/2001-01-1763