The influence of cold plasma-surface modification on the grip of the electroplating finish to graphite composite and for its usefulness in soldering processes
Article Sidebar
Main Article Content
Abstract
In the article issues concerning preparing the surface of graphite composite before putting the galvanic copper layer and its influence on the soldering process were de- scribed in connections with metallic materials. To samples of graphite composite, of which the area was prepared with different methods, and in final processing using cold plasma, produced in the atmosphere of argon, galvanic a layer of copper was put, and then a research on the grip of the layer was performed to base material. The results were compared with earlier conducted endurance measurements of connectors of composite with the copper layer, soldered on softly with elements of the alloy of PA38 aluminium (6060).
Downloads
Article Details
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Welding Technology Review (WTR) articles are published open access under a CC BY licence (Creative Commons Attribution 4.0 International licence). The CC BY licence is the most open licence available and considered the industry 'gold standard' for open access; it is also preferred by many funders. This licence allows readers to copy and redistribute the material in any medium or format, and to alter, transform, or build upon the material, including for commercial use, providing the original author is credited.
References
Adams R.D.: Adhesive bonding Science, technology and application, Woodhead Publishing Limited 2005.
Biestek T., Sękowski S.: Metody badań powłok metalowych, WNT, Warszawa 1973.
Borcia G., Chiper A., Rusu I.: Using a He + N2 dielectric barrier discharge for the modi cation of polymer surface properties, Plasma sources Sci. Technol., 2006, 15, pp. 849-857.
Stryczewska H.D.: Technologie zimnej plazmy, Wytwarzanie, modelowanie, zastosowania, Elektryka, 201, zeszyt 1 (217), rok LVII, Instytut Podstaw Elektrotechniki i Elektrotechnologii, Politechnika Lubelska, Lublin 2014.
Campbell F., Frauenhofer J.A.: Surface Technology, 1976, 4, pp. 403-406.
Chmielewski T.: Wykorzystanie energii kinetycznej tarcia i fali detonacyjnej do metalizacji ceramiki, Prace naukowe PW, Seria Mechanika, Zeszyt 232, Warszawa 2012.
Critchlow G.W., Brewis D. M.: Review of surface pretreatments for aluminium alloys, Int. J. Adhes. Adhes.,1996, 16, pp. 255-275.
Iorio I. De, Leone C., Nele L., Tagliaferri V.: Plasma treatments of polymeric materials and Al alloy for adhesive bonding, J. Mater. Process Technol., 1997, 68, pp. 179-183.
Mirski Z., Wojdat T., Stachowicz M.: Soldering of aluminium with copper and steel using intermediate layer Zn-Ni, Archives of Civil and Mechanical Engineering, 2015, vol. 15, nr 4, pp. 903-910.
Mirski Z.,Wojdat T., Piwowarczyk T., Granat K., Derlukiewicz W., Ciepacz I., Jakubczyk A.: Lutowanie miękkie kompozytu gra towego ze stopem aluminiowym PA38, Przegląd Spawalnictwa, 2016, vol. 88, nr 9, s. 50-55.
Tioshifuji J., Katsumata T., Takikawa H., Sakakibara T. & Shimizu I.: Cold arc-plasm jet on the atmospheric pressure for surface modi cation, Surface and Coating Tech. 2003, 171, pp. 302-306.
Wiedemann R., Motta de Sillos R.: Technical Handbook, Surface Treatments, 2007, pp. 136-138.