Comparison of tribological properties and structure of coatings produced in powder flame spraying process on grey cast iron

Main Article Content

Artur Czupryński
Marcin Adamiak
Emin Bayraktar
Bernard Wyględacz

Abstract




In this article results of tribological and structural properties comparison of flame sprayed, by SupJet-S-Eutalloy® multipurpose system, two self-fluxing alloys of Ni-B-Si type in the form of powder for spraying with remelting are presented. Layers were produced on EN-GJL-250 grade grey cast iron with flake graphite in an austenitic matrix. Abrasive wear resistance examination acc. to ASTM G65-00 and erosive wear resistance examination acc. to ASTM G76-2 were performed. Obtained results were compared with abrasion-resistant steel Hardox® 400. Macro- and microscopic examination were carried enabling layer quality evaluation and structure of examined layer and base material determination. X-ray microanalysis was performed to obtain qualitative and quantitative data about microareas chemical composition. The Eutalloy® BronzoChrom 10185 powder flame sprayed layer with higher Boron and Silicon content was characterized by 13% lower wear intensity under mineral abrasive conditions and about 30% higher erosion wear resistance than Eutalloy® NiTec 10224 powder flame sprayed layer.




Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
A. Czupryński, M. . Adamiak, E. Bayraktar, and B. Wyględacz, “Comparison of tribological properties and structure of coatings produced in powder flame spraying process on grey cast iron”, Weld. Tech. Rev., vol. 92, no. 3, pp. 7–21, May 2020.
Section
Original Articles

References

Tobota K., Chmielewski T., Chmielewski M., Microstructure and selected properties of Ni-Cr-Re coatings deposited by means of HVOF thermal spraying. Welding Technology Review, 2019, Vol. 91(1), 2530. https://doi.org/10.26628/wtr.v91i1.1000 DOI: https://doi.org/10.26628/wtr.v91i1.1000

Bhushan B., Principles and Applications of Tribology, 2013, New York, John Wiley & Sons, 980. DOI: https://doi.org/10.1002/9781118403020

Marcos Sá DeSousa J., Ratusznei F., Pereira R., de Medeiros Castro R., Mercado Curib E.I., Abrasion resistance of Ni-Cr-B-Si coating deposited by laser cladding process. Tribology International, 2020, Vol. 143, 106002. https://doi.org/10.1016/j.triboint.2019.106002. DOI: https://doi.org/10.1016/j.triboint.2019.106002

Shveikin G.P., Sokolova N.V., Rudenskaya N.A., Kuzmin V.I., Supersonic plasma and wear-resistant nickel alloy coatings. Доклады Ðкадемии Ðаук, 2015, Vol. 463(3), 309312. DOI: https://doi.org/10.1134/S001250081507006X

Ilushchenko A. F., Manoylo E. D., Andreev M. A., Onashchenko F. E., Flame spraying of coatings of self-fluxing alloys. Welding International, 2017, Vol. 31(11), 887-891. https://doi.org/10.1080/09507116.2017.1349279 DOI: https://doi.org/10.1080/09507116.2017.1349279

Hejwowski T., Erosive and abrasive wear resistance of overlay coatings. Vacuum, 2008, Vol. 83(1), 166170. DOI: 10.1016/j.vacuum.2008.03.029 DOI: https://doi.org/10.1016/j.vacuum.2008.03.029

Majewski D., Hejwowski T., Łukasik D., The influence of microstructure of arc sprayed coatings on wear resistance. Advances in Science and Technology. Research Journal, 2018, Vol. 12(1), 285292. https://doi.org/10.12913/22998624/86210 DOI: https://doi.org/10.12913/22998624/86210

Jimneza H., Olayaa J.J., Alfonsob J.E., Pineda-Vargas C.A., Corrosion resistance of Ni-based coatings deposited by spray and fuse technique varying oxygen flow. Surface and Coatings Technology, 2017, Vol. 321, 341349. https://doi.org/10.1016/j.surfcoat.2017.04.068. DOI: https://doi.org/10.1016/j.surfcoat.2017.04.068

http://www.castolin.com

Bęczkowski R., Gucwa M., Qualifying of hardfacing surfacing layers operating under conditions of the cement industry. Welding Technology Review, 2015, Vol. 87(9), 4346. https://doi.org/10.26628/wtr.v87i9.450

Dorfman M.R., Thermal Spray Coatings. Handbook of Environmental Degradation of Materials (Third Edition), 2018, DOI: https://doi.org/10.1016/B978-0-323-52472-8.00023-X

Kondej A., Babul T., Microstructure of the Ni-Cr-B-Si coating obtained in surfacing process. Welding Technology Review, 2016, Vol. 88(3), 2326. DOI: https://doi.org/10.26628/ps.v88i3.574

Most read articles by the same author(s)

1 2 > >>