The influence of solution annealing temperature on the properties of Lean Duplex 2101 welded joints in tubes
Article Sidebar
Main Article Content
Abstract
The article presents a technology of TIG longitudinal welding without filler material (142) of heat exchanger tubes made of Lean Duplex 2101. The results of studies on the effect of heat treatment (solution annealing) on tensile strength, plasticity, delta ferrite and the structure of smooth tubes are shown. It was found, that the change in solution annealing temperature across the tested range has an impact on mechanical properties of welded tubes and the most advantageous solution annealing temperature (1050 °C) was determined.
Downloads
Article Details
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Welding Technology Review (WTR) articles are published open access under a CC BY licence (Creative Commons Attribution 4.0 International licence). The CC BY licence is the most open licence available and considered the industry 'gold standard' for open access; it is also preferred by many funders. This licence allows readers to copy and redistribute the material in any medium or format, and to alter, transform, or build upon the material, including for commercial use, providing the original author is credited.
References
Minor T., Analysis of the technical and legal status of gas installations in Poland in terms of the safety of their exploitation - proposals for changes, Nafta-Gaz 11/2017.
Mindur M., Processes of extraction and transport of crude oil and natural gas in selected EU countries, Logistyka 4/2015.
Szruba M., Pipes in infrastructure, Nowoczesne Budownictwo Inżynieryjne 1/2017, 42-44.
Rogalski G., Łabanowski J., Kwalifikowanie technologii spawania zgodnie z wytycznymi normy PN-EN ISO 15613 na przykładzie wytwarzania rur stosowanych w płaszczowo-rurowych wymiennikach ciepła, Biuletyn Instytutu Spawalnictwa 2011, Vol. 55(5), 57-61.
Rogalski G., Fydrych D., Kwalifikowanie technologii spawania wg PN-EN ISO 15614-8 na przykładzie płyt sitowych w U-rurowych wymiennikach ciepła, Welding Technology Review 2012, Vol. 84(2), 27-35. DOI: https://doi.org/10.26628/ps.v84i2.396
Świerczyńska A., Rogalski G., Fydrych D., Badania struktury i właściwości spawanych austenitycznych rur wymienników ciepła, Welding Technology Review 2010, Vol. 82(6), 11-16.
Rogalski G., Łabanowski J., Fydrych D., Świerczyńska A., Wpływ obróbki cieplnej na właściwości spawanych austenitycznych rur wymienników ciepła, Welding Technology Review 2014, Vol. 86(6), 24-31. DOI: https://doi.org/10.26628/ps.v86i6.68
Ha H.Y., Lee T.H., Lee C.G., Yoon H., Understanding the relation between pitting corrosion resistance and phase fraction of S32101 duplex stainless steel, Corrosion Science 2019, Vol. 149, 226-235. DOI: https://doi.org/10.1016/j.corsci.2019.01.001
Arabi S.H., Pouranvari M., Movahedi M., Pathways to improve the austeniteferrite phase balance during resistance spot welding of duplex stainless steels, Science and Technology of Welding and Joining 2019, Vol. 24(1), 8-15. DOI: https://doi.org/10.1080/13621718.2018.1468949
Rogalski G., Prokop K., Fydrych D., Łabanowski J., Badania złączy spawanych bimetalu zgrzewanego wybuchowo stali niestopowej Grade 60 ze stopem Monel 400, Welding Technology Review 2014, Vol. 86(6), 17-23. DOI: https://doi.org/10.26628/ps.v86i6.67
Rogalski G., Fydrych D., Landowski M., Łabanowski J., Weldability of titanium Grade 2 on example of shell and tube heat exchanger, Welding Technology Review, 2015, Vol. 87 (10), 17-22. DOI: https://doi.org/10.26628/ps.v87i10.482
Zhu L., Chen S., Yang Y., Sun Y., Transient heat transfer performance of a vertical double U-tube borehole heat exchanger under different operation conditions, Renewable Energy 2019, Vol. 131, 494-505. DOI: https://doi.org/10.1016/j.renene.2018.07.073
Łyczkowska K., Adamiec J., Resistance of welded joints 304 and 304H to intercrystalline corrosion, Welding Technology Review 2017, Vol. 89(9), 31-36. DOI: https://doi.org/10.26628/ps.v89i9.809
Lange A., Białucki P., Bashir A., Harapińska E., Małachowska A., Causes of cracks of chemical apparatus made of austenitic steel, Welding Technology Review, 2018, Vol. 90(12), 25-31. DOI: https://doi.org/10.26628/wtr.v90i12.986
Górka J., Grzesica K., Golda K., Orbital TIG welding of X5CrNi18-10 austenitic stainless steel, Welding Technology Review, 2018, Vol. 90(5), 55-59. DOI: https://doi.org/10.26628/ps.v90i5.898
Nakonieczna N., Adamiec J., The tendency to hot cracking of the welded joints of nickel superalloy Inconel 617, Welding Technology Review, 2017, Vol. 89(5), 17-22. DOI: https://doi.org/10.26628/ps.v89i5.758
Kamela A., Adamiec J., Evaluation of high temperaturę corrosion resistance of hybrid welded membrane walls panels joints of austenitic stainless steel, Welding Technology Review 2018, Vol. 90(7), 26-29.
Kiszka A., Czupryński A., Baszczyńska E. Effect of shielding-gas nitrogen content on the properties of TIG and A-TIG orbital-welded tubular joints made of duplex steel. Biuletyn Instytutu Spawalnictwa w Gliwicach 2018, Vol. 62(2), 35-40. DOI: https://doi.org/10.17729/ebis.2018.2/4
Świerczyńska A., Łabanowski J., Fydrych D., Effect of linear energy and microstructure on the content of residual hydrogen in welded joints made of superduplex steels, Biuletyn Instytutu Spawalnictwa w Gliwicach 2016, Vol. 60(5), 171-178. DOI: https://doi.org/10.17729/ebis.2016.5/22
Souza C.S., Soares R.B., de Faria R.A., Bracarense A.Q., Castro M.D.M., de FC Lins V., Effect of heat input on the corrosion resistance of the cold worked 2304 lean duplex stainless steel GMAW welded joint, Materials and Corrosion 2019, Vol. 70(3), 409-418. DOI: https://doi.org/10.1002/maco.201810441
Mitelea I., Uţu I.D., Karancsi O., Crăciunescu C.M., Investigation of the microstructure of dissimilar welds in duplex stainless steel and low alloyed steel, Materials Testing 2019, Vol. 61(2), 120-124. DOI: https://doi.org/10.3139/120.111292
Łabanowski J., Prokop-Strzelczyńska K., Rogalski G., Fydrych D., The effect of wet underwater welding on cold cracking susceptibility of duplex stainless steel, Advances in Materials Science, 2016, Vol. 16(2), 68-77. DOI: https://doi.org/10.1515/adms-2016-0010
Arun D., Ramkumar K.D., Vimala R., Multi-pass arc welding techniques of 12 mm thick super-duplex stainless steel, Journal of Materials Processing Technology, 2019, Vol. 271, 126-143. DOI: https://doi.org/10.1016/j.jmatprotec.2019.03.031
www.secespol.pl
Westin E.M., Johansson M.M., Pettersson R.F.A., Effect of nitrogen-containing shielding and backing gas on the pitting corrosion resistance of welded lean duplex stainless steel LDX 2101® (EN 1.4162, UNS S32101), Welding in the World, 2013, Vol. 57(4), 467-476.