Repair welding of cast steel G20Mn5
Article Sidebar
Main Article Content
Abstract
The article describes the effect of repair welding, using MAG method with solid wire AUTOROD 12.51 in the ARCAL 5 mixture, on the properties and structure of low-alloy cast steel G20Mn5 in two delivery states: after normalizing and normalizing with quenched and tempered. Repairing was subjected to casting with simulated defects made by me- chanical machining (milling). The obtained repair areas were subjected to: visual and penetration tests, macro and micro- scopic tests, hardness and impact tests as well as visual assessment of the comparison of the colour of the repaired material in relation to the base metal. As a result of the con- ducted tests, it was found that the structural changes in the heat affected zone (HAZ) are similar in two cases of delivery status. The impact tests performed showed higher impact strength in the case of a quenched and tempered sample. The appearance of padding on the surface did not differ sig- nificantly from the base metal.
Downloads
Article Details
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Welding Technology Review (WTR) articles are published open access under a CC BY licence (Creative Commons Attribution 4.0 International licence). The CC BY licence is the most open licence available and considered the industry 'gold standard' for open access; it is also preferred by many funders. This licence allows readers to copy and redistribute the material in any medium or format, and to alter, transform, or build upon the material, including for commercial use, providing the original author is credited.
References
Knaginin G.: Staliwo: metalurgia i odlewnictw, wyd. Śląsk, Katowice 1977.
Staronka A.: Zarys metalurgii i odlewnictwa staliwa cz. 1 Metalurgia, AGH, Kraków, 1986.
Stradomski Z., Stachura S., Dyja D., Zyska A.: Technologiczne problemy wytwarzania masywnych odlewów ze staliwa duplex w aspekcie optymalizacji procesu produkcyjnego, Archiwum Odlewnictwa, 17, s. 287-292, 2015.
Bęczkowski R., Gucwa M.: Wybrane aspekty napraw odlewów korpusów urządzeń energetycznych, Przegląd Spawalnictwa vol. 87 (5), s. 106-109, 2015.
Mistur L.: Spawanie i napawanie w naprawach części maszyn i konstrukcji metalowych, Wyd. KaBe, Krosno, 2003.
www.metalockengineering.com,
Mazur M.: Podstawy spawalnictwa, Wydawnictwo Politechniki Śląskiej, Gliwice, 1993.
Pilarczyk J., Pilarczyk J.: Spawanie i napawanie elektryczne metali, Wydawnictwo Śląsk, Katowice 1996.
Norma PN-EN 10293
www.esab.com: OK Autrod 12.51 Premium quality copper-coated wire