Laser Welding of Stiffening Ribs to the Casing of a Jet Engine

Sebastian Stano, Marcin Zawadzki

Abstrakt


The study addresses the results concerning the autogenous laser welding of T-joint with a butt weld used in the structure of casing panels. The joints were made of 1 and 1,5 mm thick AISI 17-4PH (X5CrNiCuNb16-4) steel. Exemplary welding parameters were determined. The influence of the beam setting in relation to the interface of sheets over joint quality according to PN-EN ISO 13919-1 was investigated. An Actual Test Elements of the Casing with the Stiffening Ribs was welded. Limitations on the use of laser welding tech- nology related to the preparation of welding elements have been specified.


Słowa kluczowe


laser welding; stainless steel; welded structure

Pełny tekst:

PDF

Bibliografia


Pod red. J. Pilarczyka: Poradnik inżyniera Spawalnictwo tom I i II, Wydawnictwa WNT, Warszawa 2014.

Brózda J.: Stale konstrukcyjne i ich spawalność. Instytut Spawalnictwa, Gliwice 2009, ISBN 978-83-611272-20-5.

Stano S., Adamiec J., Dworak J., Urbańczyk M.: Badania procesu spawania laserowego złączy teowych z cienkich blach austenitycznych. Biuletyn Instytutu Spawalnictwa, nr 5, 2016, s. 141-151.

Różański M., Stano S., Grajcar A.: Spawanie laserowe i obróbka cieplna stali typu 0H15N7M2J, Biuletyn Instytutu Spawalnictwa, Vol. 60, nr 4, 2016, s. 51-57.

Kubiak M., Piekarska W., Stano S., Saternus Z., Domański T.: Numerical Prediction Of Deformations In Laser Welded Sheets Made Of X5CrNi18-10 Steel. Archives of Metallurgy and Materials. Volume 60, Issue 3, pp. 1965-1972, ISSN (Online) 2300-1909, DOI: 10.1515/amm-2015-0334, November 2015.

Kurc-Lisiecka A., Piwnik J., A. Lisiecki A.: Laser Welding of New Grade of Advanced High Strength Steel STRENX 1100 MC. Archives of Metallurgy and Materials 62, 3, 2017, pp. 1651-1657.

Lisiecki A.: Effect of heat input during disk laser bead-on-plate welding of thermomechanically rolled steel on penetration characteristics and porosity formation in the weld metal. Archives of Metallurgy and Materials 61, 1, 2016, pp. 93-102.

PN-EN ISO 13919-1:2002 – Spawanie – Złącza spawane wiązką elektronów i wiązką promieniowania laserowego – Wytyczne do określenia poziomów jakości według niezgodności spawalniczych – Część 1: Stal.




DOI: http://dx.doi.org/10.26628/wtr.v90i5.892

Refbacks

  • There are currently no refbacks.